Pontiac Seals  

Pontiac Water Pump Sleeves

Pontiac Water Pump Sleeves

These seals are placed in the timing cover holes for use with a stock style water pump on 1969 and up Pontiac timing covers.  These sleeves are essential to efficient water pump operation.  This is a frequently overlooked part  in your Pontiac's cooling system.  If your replacing your water pump you should inspect and replace these sleeves if necessary.   These replace GM part # 9796347

WP-002
 

Shop our new online store here.....


Pontiac Timing Cover Crank Seal

Pontiac Timing Cover Seal

Keep your oil where it belongs with these timing cover seals from Tin Indian Performance. Made of top-quality materials, they provide you with excellent sealing and peace of mind.

TIP-TC-13
1964-1977 TIMING COVER Crank Seal  ALL PONTIAC V-8

Shop our new online store here.....


   Pontiac Intake water crossover to Timing cover seal

Pontiac water crossover to timing cover seal

TIP-CROSS
This doughnut style seal goes into the intake water cross over and mates up with the back of the timing cover on both the early (8 bolt) and late style (11 bolt) timing covers.  This hard to find seal can be purchased individually or it is available in one of our full engine overhaul gasket sets.

Shop our new online store here.....


Pontiac Rear Main Seals

We are happy to introduce our new and improved 3" Viton ® Pontiac Rear Main Seals as well as our 3.25" Viton ® Pontiac Rear Mains seals.   Why the redesign you ask?  Most of the changes made to the seal were cosmetic - plain and simple!  Excess flash has been removed from the seals and other areas of the molding process "tightened up".    See below....

TIP-RM300 installed ni a stock Pontiac rear main cap

TIP-RM300 logo on seal - clearly defined sealing lip

TIP-RM300 outer diameter of seal

Helix continues to the edge of
sealing lip to match with other seal for a perfect seal.   Seal ends are properly trimmed and have the correct cap shape / form.

Molded sealing lip flash line is
above and away from sealing lip.  No uneven flash on lip and clearly labeled Tin Indian Performance RM300

OD of seal is very clean
with no offset between halves.  NO  flash present

 Unlike other seals are seals made in the USA (not  some foreign country) AND we have such confidence in our product, we will never try to sell you a revamped rear main rope seal.  You won't EVER see us selling a rope seal, period!  Our seals are clearly labeled with TIN INDIAN PERFORMANCE  and both the RM300 and  the RM325 seals.  We are so confident in our seals that we put our company name right on them; not some other company name or no labeling at all. Our seals are color coded as well.  The purple seal is our 3" Viton ® Pontiac rear main seal and our black seal is our 3.25" Viton ® Pontiac rear main seal.  Our seals are made and designed by Pontiac Engine Builders and are the clear choice when you want the absolute best in oil control when rebuilding your Pontiac engine.  We are consistently lookinf to improve and deliver the best quality possible in our gaskets and seals.

Pontiac 3" Viton Rear Main Seal

Pontiac 3" Viton ® Rear Main Seal

These Tin Indian Performance Gasket & Seal Pontiac rear main seals are specifically designed for the Pontiac block.  Seals fit both stock and aftermarket MR-1 Pontiac blocks.  Seals are made of Viton and are far superior to the factory rope seal.  They are the single most reliable way to control oil in a Pontiac engine.  

TIP-RM300

Shop our new online store here.....


Pontiac 3.25" Viton Rear Main Seal

Pontiac 3.25" Viton ® Rear Main Seal

These Tin Indian Performance Gasket & Seal Pontiac rear main seals are specifically designed for the Pontiac block.  Seals fit both stock and aftermarket MR-1 Pontiac blocks.  Seals are made of Viton and are far superior to the factory rope seal.  They are the single most reliable way to control oil in a Pontiac engine.  

TIP-RM325

Shop our new online store here.....