We have partnered
with the best parts suppliers in the Pontiac community to provide you with the
most mileage for your performance dollar! We are here to help your Pontiac
make POWER!
Whether your setup is all stock,
street/strip or all out race, we are here to help you meet your performance
goals. We carry a wide assortment of Pontiac performance parts and a
Pontiac engine builder.
We also
build Pontiac Performance engines too! Unlike some "Pontiac
Engine Builders" we build our OWN engines for our own race cars.
We also build our OWN Pontiac engines with the same parts we sell and
manufacture!
NEWS
The Quickest and Fastest Naturally Aspirated
Pontiac in the WORLD just got quicker and faster!
On April 23, 2010 we
ventured out to Summit Motor Sports Park in Norwalk, Ohio to test out all
of the R&D that had been done over the winter with our 1000+ HP KRE
High Port HeadedMR-1
powered power plant and reset the Naturally Aspirated
Pontiac record! Not only did we reset our own record but we were
the first to break into the 6 second barrier with naturally aspirated
traditional Pontiac power! This is a true milestone in Pontiac
performance.
The first pass off
the trailer was a 6.89 @ 190.89! After getting back to the pits we
discussed changing launch rpm only for the next pass. The car had a
.986 60 foot time! That helped us get our best pass to date, 6.81 at
192.28!!
I would like
to thank the Bader family and the staff at Summit Motor Sports Park as well
for maintaining a fantastic facility and giving us a stellar track to make
these passes.
Track data showed we still have some
room for improvement and we hope to get out again here very soon. We
firmly believe this combo has .70s in it maybe more.
Reaching this milestone has taken a lot of
hard work and dedication from quite a few people. I would like to give
special thanks to Mark and Jeff Kauffman of Kauffman Racing Equipment.
Without their support, knowledge, and dedication to not only my racing
program but the entire Pontiac hobby as well, this would not be possible. Mike
Williams, Bill
Mellott, Steve Kauffman, Kenny Criss, and Nathan Morris have also been
instrumental in the success of our racing program as well.
Thank
you very much for all you do for me and Tin Indian Performance!
This is the first time out with this combo. On the
second pass of the day 6.81 @ 192.28 mph!
The first pass of the day netted us a 6.89 @ 190.89
NEW PARTS
Pontiac Oil Pump Gaskets
Pontiac Oil pump to block gasket
TIP-130800
$1.50 each
Pontiac Engine Cradle
These engine stands are designed
specifically for the Pontiac engine. Each is made in the USA and test fit
to Pontiac block upon completion. NO beating or bending of these stands to
get them to fit! All mounting hardware is included.
Pontiac Engine Stand
Pontiac Engine Stand with Casters
CRADEL-001
CRADEL-001-C
$115.95
$135.95
1966 Tripower 2bbl Carb Gasket - Telfon
1966 Tripower 2bbl Carb Gasket - .062 paper
TIP-2bbl-T
TIP-2bbl
Michelle Moretti's
75 TA Back Half project
and MR-1A installation
We are currently working on installing a roll cage and a
new back half on Michelle's 1975 Pro Street Trans Am. This work is
being done with Bill Brautigam from Bill's Garage. More info on the build
can be found on Michelle's
1975 Pro Street TA page....
Want to stay up to date
with all of our new products and press releases?
Custom engraved Billet
Specialties Air Cleaner lids
These are our new custom engraved billet
aluminum air cleaners. Pictured above is the air cleaner lid we
engraved for the CF-71
Freedom Bird engine. The kit includes a 14" Billet
Specialities drop base 3" filter element air cleaner with a matching
carb stud. We now offer custom engraving on these air cleaner
lids now starting at $85.00. The standard
Tin Indian Performance logo air cleaner kit is available for $200.00.
As with our custom
engraved Pontiac valve covers,
you are only limited by your imagination with what you can get engraved on
the air cleaner lids! Call or email us and we can send you a
proof of what your design will look like on the air cleaner lid.
Plain 14"
air cleaner kit
14" air
cleaner kit with TIP logo
14" air
cleaner kit with custom logo
BSP-15829
BSP-TIP-15829
BSP-CUSTOM-15829
$150.00
$200.00
$235.00
We now offer the early water pump gasket (8 bolt).
This gasket will work great on both KRE
early timing covers or stockers. Gaskets are made from
the same high quality paper and are .035 thick.
Early Water Pump
Gasket
TIP-130600E
$6.50
POWER HUNGRY?
Build a KILLER
pump gas friendly street / strip engine!
MR-1A Aluminum Pontiac
Blocks, MR-1 PRO, and MR-1A PRO Aluminum blocks are now available [more
info here]
We have blocks and
forged cranks!!!
Cast Iron $2,995.00
/ Aluminum $4,295.00
** Accepts all stock
Pontiac Parts **
For Street or Race use
We are ALWAYS working on a new on-line
catalog / parts listing. Check back for new products and
updates! If you don't see something your looking for, shoot us a mail or
give us a call!
In an effort to not clutter up the
main page, please check out our New
Pontiac Performance Parts page. This is where you will find
most of our new / recent offerings.
KRE Cylinder heads are the
most efficient Pontiac cylinder heads on the market!
They are also the
most versatile Pontiac heads available. No other heads cover the street
and bracket racing market like the KRE heads. By far the best bang for the
buck!
64 cc and 80 cc High Port chambers are Now
available!
To place an order call us at 330-699-1358 or send us an email @ kevin.swaney@tinindianperformance.com.
Please include you name, address, and telephone number. Payment is handled
right before shipping. 50% deposit required on custom orders.
and we will get right back to you.
